STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
See it in action!
Pre-Separation Air Filtration System
This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
Toolless fuel and oil caps with retainers
Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.
The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Common Features for Chainsaws
View the features common to many STIHL chainsaws.
STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
HP Ultra 2-Cycle Engine OilHP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.
•2.6 oz. bottle makes 1 gallon mix
•5.2 oz. bottle makes 2 gallon mix
•6.4 oz. bottle makes 2 1/2 gallon mix
•12.8 oz. bottle makes 5 gallon mix
STIHL recommends a mix of 50:1 high-quality 89 octane or higher unleaded gasoline to STIHL engine oil. This same mix ratio should be used during break-in.
Bar and Chain OilSTIHL Bar and Chain oil is formulated to adhere to the bar and chain, and to reduce wear. Special agents in the oil formulation help keep sap and pitch from clinging to the bar and chain.
Available in quart and gallon bottles, 5 gallon pails and 55 gallon drums, in both summer and winter weights.
Complete Filing KitsKits available for the following chain types: STIHL PICCO™ Mini; 1/4" pitch chain; .325" pitch chain; 3/8" pitch chain; .404" pitch chain.
Includes file guide, depth gauge, round file, flat file and two file handles in tool pouch.
Chain Pitch File Diameter File Guide
in. mm in. mm Part Number 3/8 PMN 9.32 5/32 4.0 0811 411 8073 1/4
5/32 4.0 0811 411 8091 0.325 8.25 3/16 4.8 0811 412 8088 3/8 9.32 13/64 5.2 0814 243 3384 5605 750 4329 0.404 10.26 7/32 5.5 0811 412 8108 5605 750 4330
Pro Mark™ Forestry Helmet SystemThe STIHL Pro Mark™ Forestry Helmet System is a premium quality product, designed with NRR 25 hearing protection and adjustable ratchet-style six-point suspension.
Pro Mark™ Denim Protective PantsAs comfortable as blue jeans, only better. Has pads with multiple layers of sewn-in Avertic™ Pro by Engtex® cut-retardant material. Sturdy and comfortable poly/cotton blend with elasticized waist and belt loops. Two back pockets, two side pockets plus a deep front cargo pocket.
Meets protection for chainsaw operators OSHA Reg. 1910. 266 and classified by UL using ASTM Test method F 1414 in accordance with ASTM standard F 1897 for leg protection.
Performance Forestry Boots
Combine cut-resistant protection with comfort when you buy our STIHL performance forestry boots. Whether tackling tree removal or a tough landscaping job, this forestry boot will meet the demands of most any task. You’ll benefit from additional features like its well-padded steel toe cap, puncture resistant throughsole, and waterproof exterior. The insole and arch support systems were anatomically formed to provide maximum comfort, and the low-weight sole offers wear-resistant, nonslip traction. Stop by our STIHL showroom to check out what could be your next go-to work shoe.
Performance Cut-Retardant MittsMade with water-resistant nylon backs and goatskin palms for comfort and a better grip without sacrificing dexterity. Avertic™ Pro by Engtex® cut-retardant material sewn into back of left glove. High-visibility orange color, separate index finger, and hook and loop wrist straps make these three-fingered chainsaw protective gloves an excellent choice for the professional logger. Sizes available: S (8), M (9), L (10), XL (11).
Reserve with STIHL Express for In-Store Pick Up
With STIHL Express, you can reserve the STIHL product you need right from your home or office and pick it up at your local STIHL Dealer.
- Compare STIHL products online 24 hours a day, 7 days a week.
- Pick up products assembled and ready to go
- Get the ease of reserving online while still having access to advice from your local STIHL Dealer.
Distributor Suggested Retail Price
Buy Now for Home Delivery
STIHL OUTFITTERS™ goods are sold and shipped by authorized STIHL OUTFITTERS™ Licensees. Ordering online is easy and items can be delivered directly to your address.
Show off your STIHL pride today!
MS 441 C-M MAGNUM® Description
Featuring STIHL M-Tronic™ – an engine management control system that intelligently manages the operating performance of the engine – the MS 441 C-M MAGNUM® chainsaw is ideal for professional jobs. The innovative system eliminates the low- and high-speed carburetor adjustment screws and compensates for dirty air filters, changes in elevation and fuel quality through an electronic monitoring of the engine, digitally controlling the fuel/air mixture. Designed with the professional in mind, the MS 441 C-M MAGNUM® features a side-access chain tensioner and an advanced anti-vibration system that helps reduce user fatigue. A translucent fuel tank makes checking levels easy. A decompression valve and pre-separation air filtration offer an easier start and longer run times.